Digitus DN-13003-1 Bedienungsanleitung

USB 2.0 FAST ETHERNET PRINTSERVER User Manual D

103. Software Installation The PSAdmin is a proprietary Windows-based management program that can assist you in configuring and managing your print

3. Choose one to install the print server and configure t

125. From the Select A Print Sever screen, select the print server that you want to configure and click Next.

6. On the Change Settings screen, select No or Yes: Cl

147. In the setup wizard, select an already configured printer from the list, click Next, Next and then Finish to complete the installation. Or Sel

8. Click Add New Printer to launch Windows Add Printer Wi

1610. Make sure the Use the following port radio-button is clicked and select LPT1: (recommended Printer Port) from the pull-down list. Then click N

12. If you already have the printer’s driver installed, y

1815. From Windows system, go to start -> Printers and Faxes and highlight your newly installed printer. 16. Right-click, select Properties -&g

17. Go to General; click Print Test Page to verify the co

2TABLE OF CONTENTS COPYRIGHT ...

20Wizard Wizard is a configuration program that can assist you in setting up the necessary parameters for your print server device to function. Setup

4 (Optional) In the Subnet Mask option, type the Subnet M

22Manual Setup Manual Setup is a configuration program designed for more experienced users of NetWare. To setup the print server by using Manual Setu

Properties –TCP/IP Options The TCP/IP options allow you t

24Upgrade Upgrade allows the user to upgrade the print server device. In order to upgrade the unit please perform the steps as follows: 1. Click Up

Multiple Print Queues Configuration To configure the prin

26Uninstalling the PSAdmin on Windows PC To help users easily remove all installed software components of the PSAdmin from their Windows PC, and the

4. Internet Printer Connection and HP Web JetAdmin IPP O

286. In URL’s box, input print server’s IP address, for example, http://192.168.10.182/lp1. Then Click Next. ** One port should be the port name as

10. Click Finish button. 11. Done. HP Web JetAdmin Ove

GENERAL TROUBLESHOOTING OVERVIEW ...

30Confirming Installation and Supply Access ˙Confirming that the HP Web JetAdmin software is correctly installed by navigating to it with your brows

5. Configuration from Embedded Web Server Overview The P

32System Status 1.Click Status, it then appears the sub-menu. 2.Click System, it then as shown in the following picture. Print Server Name: This o

Print Jobs: This option allows you to view all the print

34Current Status: This option allows you to view status of the printer. When the printer connected with the print server, it will be show in the sta

Netware Status: 1. Click Status, it then appears th

36NetWare Bindery Settings Use Bindery Mode: Enable or Disable. Name of the File Server: Current Status: Connect or Disconnect. AppleTalk Status

Printer Type: This option allows you to view printer type

38SMB Status 3.Click Status, it then appears the sub-menu. 4.Click SMB, it then as shown in the following picture. Workgroup Name: This option

System Setup 1.Click Setup, it then appears the sub-menu.

4Trademarks NetWare is a registered trademark of Novell Inc and Windows 95/98/Me and Windows NT/2000/XP/2003/Vista/7 are registered trademarks of Mic

40Password: This option allows you to input setup password of the print server. When you select setup menu of web configuration from the print serve

TCP/IP Setup: 1. Click Setup, it then appears the

421.Log into your NetWare file server as a Supervisor (Admin.) or equivalent. 2. Select NetWare and type in the Print server that created during PCO

To Enable NDS Mode, if you want to setup NDS environment.

447. Log into your NetWare file server as a Supervisor (Admin.) or equivalent via a Bindery connection. 8. Run NetWare’s PCONSOLE and add

4.Port Name: In this option, type a name for identificati

46SNMP Setup TCP/IP networks use a standard management protocol called Simple Network Management Protocol (SNMP). SNMP is widely used in the industr

snmp.snmpEnableAuthenTraps Enables or disables the functio

48SMB Setup The print server supports the SMB (Server Message Block) protocol, user can send the print jobs through Network Neighborhood without ins

6. Network Print Monitor Preparation The print server sup

1. Introduction Product Overview The external print server

50TCP/IP Protocol Installation 1. Click Start, point to Settings and select Control Panel. 2. Double click the Network icon. 3. If the TCP/IP Prot

NetBEUI Protocol Installation 1. Click Start, point to Set

5210. A message reading, “After your printer is installed, Windows can print a test page so you can confirm that the printer is set up properly.” Se

 By default, the computer will first search for the prin

547. TCP/IP LPR Port Printing Installation Basic TCP/IP Installation Overview When installing your print server in a TCP/IP environment, IP addres

5. From the Printer Ports box as shown in the following p

56Windows 2000/XP/2003/Vista/7 Standard TCP/IP Port Printing Installation 1. Click Start, point to Settings, and select Printer. 2. Run Add Printe

6. In the Add Standard TCP/IP Printer Port Wizard box as s

589. Click Finish. 10. Select the appropriate printer manufacturer and printer type list and click Next. 11. Type in a new Printer name or leave

UNIX Installation After the static IP address is assigned

6LED Indicators LED State Indication Status Blinking for POST (Orange) When power switched on, the Status indicator will flash five times, and then

60Redhat Linux 9(Fedora) The Print Server can work under any Linux-based systems, including Slackware, RedHat, etc, without any problems. Basically

6. Click New button. 7. Click Forward button. 8. In

629. In the Queue Type field, choose Networked UNIX. 10. In the Server field, type the IP address of print server 11. In the Queue field, type a

8. Upgrading Print Server Overview Upgrading print server

64Upgrading the print server from UNIX (Through TCP/IP) 1. Log in as root 2. Ensure binary file is located in your current working directory. 3.

Upgrading the print server from Browser 1. Ensure bina

66 9. Troubleshooting General Troubleshooting Overview The most common problems, which cause the print server to perform improperly, are covered in

Windows 2000/XP/2003/Vista/7 Troubleshooting Multi-Segment

686. Select your (first) network interface card and select Manual Frame Type Detection. 7. Click Add. 8. In the Frame Type field, select Ethernet

Print server Reconfiguration Procedure on Windows NT 1. C

Wall-mount Information Note: We are not responsible for d

70TCP/IP Troubleshooting When you are configuring a new print server on your NT/UNIX server through LPR Port printing under TCP/IP protocol, you migh

a. If the gateway computer is a NT/UNIX server: You have

72Appendix SMB Printing with Windows XP 1. Enable the SMB settings from the print server’s WEB configuration. Assume your computers use the “WORKGR

3. Double click it again.

744. Now you have to install the printer’s driver. 5. Choose it from the “Add Printer Wizard”.

6. Install printer successfully. 7. Now, you can find

76Reset Button Reboot the Print server: 1. Verify the power of print server is turned on. 2. Press the reset button once, and then release it. WAR

Frequently Asked Questions Question A Print jobs are sen

78 1. Check the network cabling, especially from the workstation running the PSAdmin to the print server unit. 2. Run the PSAdmin and upgrade the p

Question G The setup Wizard can’t find print server. Pos

82. Print Server Installation Preparation To meet users’ network printing needs in today’s heterogeneous and multiple protocol networking environmen

Configuration Solution Table Setup Operating System Functi